Baumannflex MM/MF
The power transmission of the Baumannflex MM/MF shaft coupling is effected by a movable transmission element consisting of a three-layer spring body made of steel wire. The coupling is temperature resistant from -30 °C to +100 °C and has large compensation ranges. Various versions such as shaft – shaft or shaft – flange as well as hub materials made of steel or stainless steel are available.
- From 2.5 – 440 Nm
- Rotation speed up to 20'000 rpm
- Temperatur range -30°C to +100°C
- Zero Backlash
- RoHs compliant
| Model | Rated torque (Nm) | Misalignment parallel (mm) | Misalignment angular (°) | Misalignment axial (mm) | Max. rpm (min-1) | Torsional stiffness (Nm/rad) | Inertia (kg·m2) | Mass (kg) |
| MM-6K | 5 | 0.3 | 3 | ＋ 0.6 | 20000 | 143 | 7.65 × 10-7 | 0.03 |
| MM-8K | 10 | 0.3 | 3 | ＋ 0.8 | 15000 | 286.5 | 4.08 × 10-6 | 0.07 |
| MM-12K | 20 | 0.4 | 3 | ＋ 1.0 | 12000 | 573 | 1.43 × 10-5 | 0.14 |
| MM-14K | 20 | 0.5 | 3 | ＋ 1.0 | 10000 | 573 | 2.47 × 10-5 | 0.15 |
| MM-16K | 40 | 0.6 | 3 | ＋ 1.2 | 9000 | 1146 | 6.12 × 10-5 | 0.30 |
| MM-19K | 40 | 0.7 | 3 | ＋ 1.2 | 8000 | 1146 | 8.42 × 10-5 | 0.32 |
| MM-20K | 80 | 0.7 | 3 | ＋ 1.6 | 7000 | 2292 | 1.99 × 10-4 | 0.70 |
| MM-24K | 80 | 0.9 | 3 | ＋ 1.6 | 7000 | 2292 | 2.63 × 10-4 | 0.75 |
| MM-25K | 180 | 0.9 | 3 | ＋ 2.0 | 6000 | 3438 | 5.66 × 10-4 | 1.25 |
| MM-28K | 180 | 1.0 | 3 | ＋ 2.0 | 6000 | 2865 | 5.77 × 10-4 | 1.35 |
| MM-30K | 300 | 1.1 | 3 | ＋ 2.5 | 5000 | 4297 | 1.39 × 10-4 | 2.10 |
| MM-35K | 440 | 1.2 | 3 | ＋ 3.2 | 4500 | 6303 | 3.01 × 10-4 | 3.50 |
| MM-6K-S | 5 | 0.3 | 3 | ＋ 0.6 | 20000 | 143 | 7.65 × 10-7 | 0.03 |
| MM-8K-S | 10 | 0.3 | 3 | ＋ 0.8 | 15000 | 286.5 | 4.08 × 10-6 | 0.07 |
| MM-12K-S | 20 | 0.4 | 3 | ＋ 1.0 | 12000 | 573 | 1.43 × 10-5 | 0.14 |
| MM-16K-S | 40 | 0.6 | 3 | ＋ 1.2 | 9000 | 1146 | 6.12 × 10-5 | 0.30 |
| MM-20K-S | 80 | 0.7 | 3 | ＋ 1.6 | 7000 | 2292 | 1.99 × 10-4 | 0.70 |
| MM-25K-S | 180 | 0.9 | 3 | ＋ 2.0 | 6000 | 3438 | 5.66 × 10-4 | 1.25 |
| Model | Rated torque (Nm) | Misalignment parallel (mm) | Misalignment angular (°) | Misalignment axial (mm) | Max. rpm (min-1) | Torsional stiffness (Nm/rad) | Inertia (kg·m2) | Mass (kg) |
| MF-8K | 10 | 0.3 | 3 | ＋ 0.8 | 15000 | 286.5 | 1.66 × 10-5 | 0.1 |
| MF-12K | 20 | 0.4 | 3 | ＋ 1.0 | 12000 | 573 | 3.32 × 10-5 | 0.16 |
| MF-16K | 40 | 0.6 | 3 | ＋ 1.2 | 9000 | 1146 | 9.18 × 10-5 | 0.31 |
| MF-20K | 80 | 0.8 | 3 | ＋ 1.6 | 7000 | 2292 | 2.12 × 10-4 | 0.5 |
| MF-25K | 180 | 0.9 | 3 | ＋ 2.0 | 6000 | 3438 | 5.33 × 10-4 | 0.9 |
| MF-30K | 300 | 1.1 | 3 | ＋ 2.5 | 5000 | 4297 | 1.35 × 10-3 | 1.7 |
| MF-35K | 440 | 1.2 | 3 | ＋ 3.2 | 4500 | 6303 | 2.86 × 10-3 | 2.8 |
| Model | d1/d2 Min. | d1/d2 Max. | D | L | L1 | E | F |
| MM-6K | 3 | 8 | 16 | 20 | 6 | 11 | 15.5 |
| MM-8K | 4 | 8 | 21 | 35 | 11 | 13 | 19 |
| MM-12K | 6 | 12 | 26 | 50 | 16.5 | 16.5 | 24 |
| MM-14K | 7 | 14 | 30 | 50 | 16.5 | 20.5 | 28 |
| MM-16K | 10 | 16 | 35 | 65 | 22 | 22.4 | 32 |
| MM-19K | 10 | 19 | 38 | 65 | 22 | 26.4 | 36 |
| MM-20K | 10 | 20 | 45 | 80 | 27 | 28 | 40 |
| MM-24K | 14 | 24 | 48 | 80 | 27 | 33 | 45 |
| MM-25K | 14 | 25 | 55 | 100 | 33.5 | 35 | 50 |
| MM-28K | 14 | 28 | 55 | 100 | 33.5 | 37 | 52 |
| MM-30K | 16 | 30 | 65 | 125 | 40 | 40.8 | 60 |
| MM-35K | 20 | 35 | 75 | 150 | 48 | 46 | 70 |
| MM-6K-S | 3 | 8 | 17 | 25 | 9 | 11 | 15.5 |
| MM-8K-S | 4 | 8 | 21 | 35 | 11 | 13 | 19 |
| MM-12K-S | 6 | 12 | 26 | 50 | 16.5 | 16.5 | 24 |
| MM-16K-S | 10 | 16 | 35 | 65 | 22 | 22.4 | 32 |
| MM-20K-S | 10 | 20 | 45 | 80 | 27 | 28 | 40 |
| MM-25K-S | 14 | 25 | 55 | 100 | 32.5 | 35 | 50 |
| Model | d1 Min. | d1 Max. | D | L | L1 | L2 | A | B | C | E | F | G | K |
| MF-8K | 4 | 8 | 21 | 30 | 11 | 6 | 42 | 30 | 18 | 13 | 19 | 1.5 | 3- ø 4.8 |
| MF-12K | 6 | 12 | 26 | 40 | 16.5 | 6 | 48 | 37 | 22 | 16.5 | 24 | 1.5 | 3- ø 4.8 |
| MF-16K | 10 | 16 | 35 | 50 | 22 | 6.5 | 58 | 47 | 30 | 22.4 | 32 | 1.5 | 4- ø 4.8 |
| MF-20K | 12 | 20 | 45 | 60 | 27 | 7 | 65 | 52 | 35 | 28 | 40 | 1.5 | 4- ø 4.8 |
| MF-25K | 14 | 25 | 55 | 75 | 33.5 | 8.5 | 75 | 62 | 42 | 35 | 50 | 1.5 | 6- ø 5.8 |
| MF-30K | 16 | 30 | 65 | 95 | 40 | 10 | 90 | 74.5 | 47 | 40.8 | 60 | 2.5 | 4- ø 7.0 |
| MF-35K | 20 | 35 | 75 | 115 | 48 | 13 | 100 | 84 | 57 | 46 | 70 | 2.5 | 6- ø 7.0 |
Servomotor
Used in the field of robotics, handling automation or for the drive of linear actuators, the requirements to the new series of Servomotors is rising daily. For the safety application in a servomotor, especially in the case of a power shortage or emergency stop, Miki Pulley…
Machine tool
Miki Pulley is proudly looking back to a long year’s successful history in the field of machinetools. With a market share of over 80% in Japan in the field of flexible shaft couplings Miki Pulley could achieve the market leader position in this specific field. The flexible…
Mechanical engineering
In the field of special machine construction there is a large variety of applications and usage of drive technology equipment. As this field is extremely wide in applications Miki Pulley is supplying to special coil winding machine producers, ship loaders…
