SFC DA2
The Double Flex DA2 version of the Servoflex SFC series impresses with its high torsional stiffness including a possible compensation function in axial, parallel and angular direction. Due to the light and high-strength aluminum alloy, it has a low mass inertia.
- Hubs out of high-strength aluminum alloy
- Ultra low inertia
- High torsional stiffness
- High flexibility
- 0.25 bis 250 Nm
| Model | Type | Rated torque (Nm) | Misalignment parallel (mm) | Misalignment angular (°) | Misalignment axial (mm) | Max. rpm (min-1) | Torsional stiffness (Nm/rad) | Axial stiffness (N/mm) | Inertia (kg·m2) | Mass (kg) |
| SFC-002DA2 | C | 0.25 | 0.03 | 1 | ±0.08 | 10000 | 95 | 17 | 0.07×10-6 | 0.004 |
| SFC-005DA2 | C | 0.6 | 0.05 | 1 | ±0.1 | 10000 | 250 | 70 | 0.37×10-6 | 0.01 |
| SFC-010DA2 | C | 1 | 0.11 | 2 | ±0.2 | 10000 | 700 | 70 | 0.80×10-6 | 0.015 |
| SFC-020DA2 | C | 2 | 0.15 | 2 | ±0.33 | 10000 | 1850 | 32 | 3.43×10-6 | 0.035 |
| SFC-025DA2 | C | 4 | 0.16 | 2 | ±0.38 | 10000 | 2800 | 30 | 5.26×10-6 | 0.04 |
| A | 7.43×10-6 | 0.054 | ||||||||
| SFC-030DA2 | B | 5 | 0.18 | 2 | ±0.4 | 10000 | 4000 | 32 | 9.45×10-6 | 0.06 |
| C | 11.56×10-6 | 0.068 | ||||||||
| SFC-035DA2 | C | 10 | 0.24 | 2 | ±0.5 | 10000 | 9000 | 56 | 26.93×10-6 | 0.121 |
| A | 29.98×10-6 | 0.124 | ||||||||
| SFC-040DA2 | B | 12 | 0.24 | 2 | ±0.6 | 10000 | 10000 | 40 | 35.82×10-6 | 0.131 |
| C | 42.52×10-6 | 0.146 | ||||||||
| A | 98.34×10-6 | 0.25 | ||||||||
| SFC-050DA2 | B | 25 | 0.28 | 2 | ±0.8 | 10000 | 16000 | 24 | 118.9×10-6 | 0.268 |
| C | 141.7×10-6 | 0.298 | ||||||||
| SFC-055DA2 | C | 40 | 0.31 | 2 | ±0.84 | 10000 | 25000 | 21.5 | 261.3×10-6 | 0.459 |
| A | 256.6×10-6 | 0.447 | ||||||||
| SFC-060DA2 | B | 60 | 0.34 | 2 | ±0.9 | 10000 | 35000 | 38.2 | 315.7×10-6 | 0.489 |
| C | 379.3×10-6 | 0.549 | ||||||||
| SFC-080DA2 | C | 100 | 0.52 | 2 | ±1.10 | 10000 | 70000 | 64 | 1039×10-6 | 1.037 |
| SFC-090DA2 | C | 180 | 0.52 | 2 | ±1.30 | 10000 | 50000 | 54 | 1798×10-6 | 1.369 |
| SFC-100DA2 | C | 250 | 0.55 | 2 | ±1.48 | 10000 | 60000 | 55.5 | 2754×10-6 | 1.739 |
| Model | Typ | d1 Min. | d1 Max. | d2 Min. | d2 Max. | D | N | L | LF | LP | S | A1 | A2 | C | d3 | K | M | Nm |
| SFC-002DA2 | C | 3 | 5 | 3 | 5 | 12 | ─ | 15.7 | 5.9 | 2.8 | 0.55 | ─ | 3.7 | 1.9 | 5.2 | 5.6 | 1-M1.6 | 0.28 |
| SFC-005DA2 | C | 3 | 6 | 3 | 6 | 16 | ─ | 23.2 | 7.85 | 5.5 | 1 | ─ | 4.8 | 2.5 | 6.5 | 6.5 | 1-M2 | 0.5 |
| SFC-010DA2 | C | 3 | 8 | 3 | 8 | 19 | ─ | 25.9 | 9.15 | 5.5 | 1.05 | ─ | 5.8 (6) | 3.15 | 8.5 | 8.5 | 1-M2.5 (M2) | 1.1 (0.5) |
| SFC-020DA2 | C | 4 | 10 | 4 | 11 | 26 | ─ | 32.3 | 10.75 | 7.5 | 1.65 | ─ | 9.5 | 3.3 | 10.6 | 10.6 | 1-M2.5 | 1.1 |
| SFC-025DA2 | C | 5 | 14 | 5 | 14 | 29 | ─ | 32.8 | 10.75 | 7.5 | 1.9 | ─ | 11 | 3.3 | 15 | 14.5 | 1-M2.5 | 1.1 |
| A | 5 | 10 | 5 | 10 | 21.6 | 8 | ─ | |||||||||||
| SFC-030DA2 | B | 5 | 10 | over 10 | 16 | 34 | 21.6 | 37.8 | 12.4 | 8 | 2.5 | 8 | 12.5 | 3.75 | 15 | 14.5 | 1-M3 | 1.9 |
| C | over 10 | 14 | over 10 | 16 | ─ | ─ | 12.5 | |||||||||||
| SFC-035DA2 | C | 6 | 16 | 6 | 19 | 39 | ─ | 48 | 15.5 | 11 | 3 | ─ | 14 | 4.5 | 17 | 17 | 1-M4 | 4.1 |
| A | 8 | 15 | 8 | 15 | 29.6 | 11 | ─ | |||||||||||
| SFC-040DA2 | B | 8 | 15 | over 15 | 24 | 44 | 29.6 | 48 | 15.5 | 11 | 3 | 11 | 17 | 4.5 | 20 | 19.5 | 1-M4 | 4.1 |
| C | over 15 | 19 | over 15 | 24 | ─ | ─ | 17 | |||||||||||
| A | 8 | 19 | 8 | 19 | 38 | 14.5 | ─ | |||||||||||
| SFC-050DA2 | B | 8 | 19 | over 19 | 30 | 56 | 38 | 59.8 | 20.5 | 14 | 2.4 | 14.5 | 22 | 6 | 26 | 26 | 1-M5 | 8.5 |
| C | over 19 | 25 | over 19 | 30 | ─ | ─ | 22 | |||||||||||
| SFC-055DA2 | C | 10 | 30 | 10 | 30 | 63 | ─ | 68.7 | 24 | 15.5 | 2.6 | ─ | 23 | 7.75 | 31 | 31 | 1-M6 | 15 |
| A | 11 | 24 | 11 | 24 | 46 | 17.5 | ─ | |||||||||||
| SFC-060DA2 | B | 11 | 24 | over 24 | 35 | 68 | 46 | 73.3 | 25.2 | 16.5 | 3.2 | 17.5 | 26.5 | 7.75 | 31 | 31 | 1-M6 | 15 |
| C | over 24 | 30 | over 24 | 35 | ─ | ─ | 26.5 | |||||||||||
| SFC-080DA2 | C | 18 | 35 | 18 | 40 | 82 | ─ | 98 | 30 | 22 | 8 | ─ | 28 | 9 | 40 | 38 | 1-M8 | 30 |
| SFC-090DA2 | C | 25 | 40 | 25 | 45 | 94 | ─ | 98.6 | 30 | 22 | 8.3 | ─ | 34 | 9 | 47 | 42 | 1-M8 | 30 |
| SFC-100DA2 | C | 32 | 45 | 32 | 45 | 104 | ─ | 101.6 | 30 | 22 | 9.8 | ─ | 39 | 9 | 50 | 48 | 1-M8 | 30 |
Mechanical engineering
In the field of special machine construction there is a large variety of applications and usage of drive technology equipment. As this field is extremely wide in applications Miki Pulley is supplying to special coil winding machine producers, ship loaders…
Servomotor
Used in the field of robotics, handling automation or for the drive of linear actuators, the requirements to the new series of Servomotors is rising daily. For the safety application in a servomotor, especially in the case of a power shortage or emergency stop, Miki Pulley…
Machine tool
Miki Pulley is proudly looking back to a long year’s successful history in the field of machinetools. With a market share of over 80% in Japan in the field of flexible shaft couplings Miki Pulley could achieve the market leader position in this specific field. The flexible…
